Xiaomi Pad Series

Xiaomi Pad eSIM support is limited: only the Pad 6S Pro in LTE configuration supports eSIM, and only the Global variant (not CN ROM). The Pad 5 and Pad 6 have no eSIM on any variant. Chinese domestic variants of the Pad 6S Pro LTE also lack eSIM hardware.

Key Takeaways

• Xiaomi Pad 6S Pro LTE (Global): eSIM supported.
• Xiaomi Pad 6S Pro Wi-Fi: no eSIM hardware.
• Xiaomi Pad 5, Pad 6: NO eSIM on any variant.
• CN ROM Pad 6S Pro LTE: NO eSIM hardware.

Does the Xiaomi Pad Support eSIM?

Only the Pad 6S Pro in LTE Global configuration. The Pad 5, Pad 6, and Wi-Fi-only Pad 6S Pro have no cellular hardware. CN ROM variants of the Pad 6S Pro LTE also lack eSIM — eSIM is a Global variant feature only.

Xiaomi Pad Models and eSIM Compatibility

How to Activate eSIM on Xiaomi Pad

1. Open Settings.
2. Tap Mobile network or SIM cards & mobile networks.
3. Tap Add eSIM or Manage eSIM.
4. Select Scan QR code.
5. Scan the QR code sent by Roamix to your email.
6. Follow the on-screen prompts to complete the installation.
7. Set the Roamix eSIM as your preferred data SIM.
8. Turn on Data Roaming in the settings for the Roamix line.

Troubleshooting Xiaomi Pad eSIM

"Add eSIM" / "Manage eSIM" missing in Settings: Three possible causes: (1) you have the Wi-Fi-only Pad 6S Pro — no cellular hardware; (2) you have a CN ROM variant — no eSIM chip; (3) you have a Pad 5 or Pad 6 — neither has eSIM. Check Settings → About tablet → Model to determine your exact variant.

"eSIM feature not available": Your Xiaomi Pad has a CN ROM. This cannot be resolved by flashing firmware unless you can install a certified Global ROM — contact Xiaomi support. CN ROM devices lack the eSIM hardware provisioning at a firmware level.

eSIM installed but no data abroad: Settings → Mobile network → SIM cards & mobile networks → select Roamix eSIM → set as default Mobile Data → enable Data Roaming. Toggle Airplane Mode on/off to re-register on the network.

QR scan fails: Must be on Wi-Fi. HyperOS camera generally handles QR scanning reliably. If repeated failures occur, use "Enter activation code" within the eSIM setup flow for manual SM-DP+ address entry.