Xiaomi 14 Series

The Xiaomi 14 and 14T series global variants support eSIM alongside a physical nano-SIM slot. One active eSIM at a time. The critical distinction for this brand: Chinese domestic (CN ROM) variants have no eSIM hardware at all — this is the most common reason Xiaomi users cannot find the eSIM option.

Key Takeaways

• Global variant: eSIM supported on all Xiaomi 14 and 14T models.
• CN ROM (Chinese domestic) variant: NO eSIM hardware — cannot be resolved by software.
• HyperOS path: Settings → Mobile network → Manage eSIM.
• Carrier unlock required for third-party eSIMs like Roamix.

Does the Xiaomi 14 & 14T Series Support eSIM?

Yes, on the Global variant. The international editions of all five models (Xiaomi 14, 14 Pro, 14 Ultra, 14T, 14T Pro) include eSIM hardware.

CN ROM warning: If your Xiaomi 14 was purchased in Mainland China or imported via Chinese online retailers (Tmall, JD.com, AliExpress CN stock), it almost certainly has CN ROM — which means no eSIM hardware. This is not a software lock. The eSIM chip is physically absent from CN ROM hardware. The error you will see is "eSIM feature not available." This cannot be fixed by installing a Global ROM or any other software change.

To confirm your variant: Settings → About phone → Model. Global models are typically labeled with EEA (Europe), IN (India), or no regional suffix.

Xiaomi 14 & 14T Models and eSIM Compatibility

How to Activate eSIM on Xiaomi 14 or 14T Series

The process is consistent across Xiaomi's recent flagship models running HyperOS:

1. Open Settings.
2. Tap Mobile network or SIM cards & mobile networks.
3. Tap Add eSIM or Manage eSIM.
4. Select Scan QR code.
5. Scan the QR code sent by Roamix to your email.
6. Follow the prompts to finish the installation.
7. Set the Roamix eSIM as your preferred data SIM.
8. Turn on Data Roaming in the settings for the Roamix line.

Xiaomi 14 eSIM for International Travel

Roamix works with any unlocked global Xiaomi 14 or 14T. Purchase a plan, scan the QR code on Wi-Fi, and the phone connects to local networks on arrival.

Carrier unlock check: Settings → About phone → SIM card status. Contact your carrier to request an unlock if needed.

Troubleshooting Xiaomi 14 eSIM

"eSIM feature not available": Your device is a CN ROM variant without eSIM hardware. This error is definitive — the chip is absent. You need the Global variant. Installing a Global ROM will NOT add eSIM capability to CN hardware.

"Add eSIM" not in Mobile network settings: On HyperOS, go to Settings → Mobile network → SIM cards & mobile networks → Manage eSIM. If "Manage eSIM" is absent, your device is CN ROM or carrier-locked.

eSIM installed but no data abroad: Go to Settings → Mobile network, select the Roamix eSIM, and enable Data Roaming. Set Roamix as the default data SIM. Toggle Airplane Mode on/off to re-register to the network.

QR code scan fails: Must be on Wi-Fi. If scanning fails, use manual entry — tap "Enter activation code" and input the SM-DP+ address from your Roamix confirmation email.